LED Guide
The SkyBell's LED color shows the status of the device. Click on the links below to identify this status.
-
-
-
-
-
-
-
-
-
- Red / Green (alternating flash)
- Red / Blue (alternating flash)
- Blue / Green (alternating flash)
- Blue / Yellow (alternating flash)
- Blue (rapid flash)
- Yellow (rapid flash)
- Orange (rapid flash)
- Red (rapid flash)
- Green (rapid flash)
- Yellow (solid)
- Green (solid)
- White (solid)
- SkyBell LED Guide (Startup & Syncing)
- SkyBell LED Guide (General Operation)
- LED Blinking Red / Blue continuously
-
-
-
-
-
-
-
-
Red / Green (alternating flash)
The SkyBell device is in Wi-Fi synchronization ready mode. Please follow the Wi-Fi syncing instructions in the SkyBell app to configure the SkyBell to connect to your home Wi-Fi network.
Note: If the SkyBell was accidentally placed into Sync mode, the operation will automatically cancel after 15 minutes, and the SkyBell will reconnect to your Wi-Fi network if it was previously configured.
Red / Blue (alternating flash)
The device is in charge. Battery charging will be completed within 10-30 mins.
Blue / Green (alternating flash)
Successfully connected to the home Wi-Fi, and awaiting SkyBell server connection.
Blue / Yellow (alternating flash)
Firmware update. Device is currently updating the firmware. This process may take 3 minutes to complete.
Blue (rapid flash)
Device is performing a Power Reset. Perform a Power Reset by holding the button until the device flashes blue (about 50 seconds).
Yellow (rapid flash)
The SkyBell is performing a factory reset. Device is erasing all user settings & information, returning the device to factory defaults. To perform a factory reset, hold the button down until it flashes yellow (about 10 seconds after it flashes blue).
Orange (rapid flash)
Awaiting Wi-Fi connection or Wi-Fi connection has been lost or SkyBell failed to connect to the router. During the syncing process, SkyBell will flash orange when connecting to your Home Wi-Fi network.
Red (rapid flash)
The SkyBell is not receiving sufficient power. This indication is typical of a failing transformer.
Green (rapid flash)
The SkyBell entering Sync mode.
Yellow (solid)
The SkyBell is currently powering up.
Green (solid)
The SkyBell is operational.
White (solid)
The SkyBell is In-call mode.